12 Companies Leading The Way In Ghost Immobiliser Fitting
Ghost Immobiliser Fitting
Secure your vehicle from key theft, cloning and hacking with the first aftermarket CAN-Immobiliser. With the option to link to a Ghost app and GPS tracking system that will send you call alerts if your car is tampered with or stolen.
The installation of the Ghost immobiliser is done by a trained technician. It is essential to have the proper equipment and heat shrink tubing.
Getting Started
Contrary to physical theft protection devices such as wheel locks or car alarms, ghost immobilisers safeguard your vehicle without the need for key fobs or LED indicators. Instead, they connect directly to the ECU's CAN data network. They can only be activated by entering a PIN sequence. This provides a more secure level of protection from key hacking, cloning, and even ECU swapping.
Therefore, the installation of a ghost immobiliser Birmingham is a task that must be carried out with a high degree of speed and accuracy. It's like walking through a minefield. autowatch ghost immobiliser cost could cause serious damage to your vehicle's electrical circuits. It is crucial to know the procedure for installing and prepare your vehicle correctly.
It is necessary to remove interior panels from the vehicle in order to make room for your immobiliser. Once you've found the ideal place to conceal it and secure it using cable ties to prevent it from being taken away or altered. Clean up your wiring by connecting loose wires and using insulation tape to cover exposed connections. This will help to minimize the risk of short circuits that are not intended to be there while also improving aesthetics and reducing the likelihood of tampering by thieves.
Find a source of constant 12V power and a grounding source for the ghost immobiliser. Once you've located them, test the power cables with a multimeter. Then, connect the CAN H and L wires from the immobiliser to your chosen power source and the grounding point.
After you've made all the necessary connections It's crucial to double-check the connections and examine the immobiliser for indications of corrosion or damage. The process of entering a PIN and launching the vehicle is a great method of testing the system. This should be a regular part of your routine, since it can help you identify any issues that may be occurring early. Regular testing also helps to extend the life of the device and ensure that it is running at its peak performance.
Preparing the Vehicle
The installation of the Ghost immobiliser is a complicated job that requires the appropriate tools and expertise. A wiring diagram is crucial for finding the correct wires, establishing precise connections and ensuring security. A multimeter is a tool to test electrical values and guarantee security. Cable tie and insulation tape can be used to secure the connections and protect them from being tampered with. Finally, a user guide will provide specific directions specifically tailored to the Ghost Immobiliser model you have.
Once installed the ghost immobiliser will stop engine starts that are not authorized by requiring the owner to enter a unique code using the buttons on the steering wheel or console. This can be accomplished manually or remotely through the mobile phone app and the code is able to be changed by the vehicle owner at anytime. The device is also silent and undetectable by thieves, since it doesn't emit any radio frequencies.
Ghost immobilisers are directly connected to the CAN bus of the vehicle, a network that communicates with the electronic control units (ECUs) of the vehicle. It intercepts signals generated by the ECUs and blocks the engine from starting when the ECU detects a false signal. The system is weatherproof and tamper proof. It does not have LED indicators or keys to draw the attention of thieves.
It can be placed behind the dashboard or in a discreet area, so it is not visible to thieves and doesn't hinder the performance of the vehicle. It can be tucked away in a small container so it is less likely to be noticed by untrustworthy salespeople during a test drive.
Its stealthy operation, combined with its integration into the CAN-bus system of the vehicle, makes it an effective deterrent to modern vehicle theft techniques, like signal relay attacks and key cloning. The system can be integrated with other security measures to create a powerful barrier that can thwart even the most obstinate thieves. This is the reason why more insurance companies are recommending or even requiring ghost immobilisers to be installed, since it can significantly reduce monthly premiums.
Making Connections
Ghost immobilisers are completely silent unlike traditional security systems that can be heard by thieves. They prevent them from knowing that your vehicle is in operation. They also block high-tech methods employed to steal vehicles, for instance, OBD port hacking. They can also be fitted without leaving permanent marks on your car, making them an excellent option for those planning to sell their vehicle in the near future.
The Autowatch Ghost 2 is a immobiliser for CANbus that is one of the most reliable and advanced solutions to protect your car from theft. It shuts down your engine by using the CAN data network and generates a unique PIN number which is difficult to steal from criminals to guess. It can be used in various vehicles and integrates with a number of available features, including car alarms, GPS trackers, steering wheel locks, and door bypass systems for locks.
If you decide to go with an Ghost immobiliser, be sure to consult the wiring diagram of your specific vehicle model to identify the wires that require connecting. Double-check the locations of these wires to ensure their accuracy and mark them with tape or labels to help you keep on track of them. You'll also need to locate a source of constant power (12V) and a grounding point for the system. Once you have the necessary components, you can begin connecting them to complete the installation.
The ghost immobiliser will not allow your vehicle to start unless you enter a pin code through the buttons on the dashboard or steering wheel. This will stop ECU replication and other methods of theft of vehicles. It can also be combined with other Thatcham approved security equipment such as alarms or tyre clips to provide your vehicle with an additional level of protection.
As the UK automotive aftermarket industry expands and expand, so do the options to secure your vehicle. With so many options for thieves to gain access and steal your car it's essential to take every precaution to protect it from being stolen. Ghost immobilisers have become a popular choice among car owners who are accountable.
Testing the System
The Ghost Immobiliser uses a CAN data network to communicate with the vehicle's ECU and prevent the engine from running until a specific PIN code is entered. This makes it very difficult for thieves to steal your key fob and start your car, and more difficult to disable the system through hacking into its electronics.
Ghost Immobilisers can also be used in conjunction with GPS tracking devices to help you locate your vehicle if it is stolen. This is a feature that isn't typically available in aftermarket security products however it is a great option to increase your vehicle's security and give you peace of peace of.
In addition to providing increased security and security, in addition to providing enhanced security, the Ghost-II immobiliser also provides a comfortable user experience by eliminating the requirement for additional key fobs or devices. It comes with an easy and simple PIN code entry system that seamlessly into your daily routine. It also comes with convenience features and deactivation settings that let you to temporarily disable the immobiliser to valet park or service your vehicle.
Before beginning the installation process, be familiar with your vehicle's wiring and prepare the required tools. A basic set of hand tools will give you the ability to create precise connections, while a multimeter will help verify electrical values. Insulation tape and heat shrink tubing are also essential for protecting connections from short circuits and cable ties can be used to secure the wiring in the correct position. It is also essential to work in a place that is well-lit and wear safety equipment when working with electrical tools and components.
After you've completed the installation you should test the Ghost immobiliser to verify that it's functioning properly. First, you need to try to start the vehicle without entering the PIN code. If this doesn't work then you'll have to retest and inspect the connections more thoroughly.
In contrast to other security systems, the Ghost Immobiliser is a covert device that cannot be detected by thieves and is much more effective than conventional physical deterrents, such as wheel clamps or steering locks. It is TASSA acknowledged and approved by a few insurance companies, making it an investment that's cost-effective and will give you the peace of mind you want.